Hi guys,
Thanks to all for the existence of this forum, is a preciuos resource for all. In Italy there aren't forums like this. The Nova (Opel Corsa in Italy) is not appreciated like in UK.
Then...
I have a Gsi with E16SE engine.
I have done few optimization for the car in these ways:
- Removed damper near fuel pump:
- Egr excluded
- Removed the "half-moon" on the butterfly of the throttle body
- Bigger hose for the airbox.
But... The car was slower, usually at high revs. I tried to tune the ignition timing, but nothing happens. Then I put the original hose for the airbox and the car came back to decent performance. Maybe there was too much air for the ecu. I thinks it needs a ecu remap. Not a problem, it is my next mod, immediatly after the exhaust.
Then I want to mount a fuel pressure regulator (before remap the ecu), but I don't find how to modify the rail of E16SE engine. In the rail there are 3 hoses: fuel in, fuel return, and depressure to the air intake body. How can I modify the rail to fit a FPR? I find an adaptor, for XE engine, but it has only 2 "holes".
I apologize if my english is not good...sorry.
Many thanks to all