Hi there , really strange question:
does the inner wing wheel arch protrude out further on the drivers side than the passenger side.
Hi there , really strange question:
does the inner wing wheel arch protrude out further on the drivers side than the passenger side.
Not as such but its a different shape due to the fuel filler neck
Sorry I meant the front end. Although I have noticed that on the rear.
This has come about after fitting some coilovers with longer inserts to the raise the ride height. Everything looks absolutely right and I’ve measured turret to turret that’s ok, position of the wheel in relation to the chassis looks right, but on the drivers side the shock absorber is a good 15mm closer to the inside wing almost touching it when the car is fully jacked up in the air
Yes they are closer mate I noticed this on my drag car the coilover on drivers side is very close to the brake flexy mount but not as close on passangers so I went and measured my standard mk1 and it was about the same diffrence to the standard shockers