No idea how this is achieved, can you not just get a custom final drive like a 3.1?
I'll just send the box to SQS and have the extra gears installed, easy done.
Sent from my iPhone using Tapatalk
The most important part, the electronics, and some wiring products, full car loom will be mil-spec.
44 rolls of Raychem spec-44 cable
And this monstrous shiny thing is the charge cooler, ice water/dry ice reservoir and 2 huge Bell cores inside, looks like I won't be having a passenger then.
Sent from my iPhone using Tapatalk
Thats a hell of a lot of wire! looks like you've got everything planned out well already, is there any part of the car not figured out yet?
Erm, I suppose just putting it all together, got most of the parts just not sure how or where anything is going to be positioned.
Once the shell is home I'll do a dry build, I think I'll install a spare engine and see if I can get it up and running myself on the MoTec, it's something I want to learn anyway.
Sent from my iPhone using Tapatalk
Whoa totally blown away by this - will the engine be dry sump lubricated?
I love raychem cable and heat shrink, soooo damn flexible and crazy strong
It is seriously good stuff, DR-25 heat shrink, ridiculously priced, as is anything mil spec to be fair.
Yes I've got Pace dry sump kit but possibly changing for a Peterson system, I'm having a one off billet sump pan made which will
Incorporate a bottom end girdle for the engine, a bit more strength won't harm.
I'm also after a different style of dry sump pump, one which allows an auxiliary pump to be driven off the rear.
I'm using a mechanical fuel pump from Aeromotive to keep up with fuel demand and also to minimise electrical circuits.
Here you can see the fuel pump, fuel pressure regulator, a 100 micron filter for pre pump and a 40 micron filter for pre rail
Although I have just bought a 10 micron System One filter which I'll probably use pre fuel rails instead
Fuel lines are Teflon coated and I'm using the following sizes
-12an from tank to pre pump filter
-12an from pre filter to pump
-10an from pump to post filter
-10an from post filter to fuel rail
-10an from rail to reg
-10an from reg to tank
May seem a bit big but those are specs from Aeromotive to prevent cavitation on the pump.
Fuel injectors I have 2 sets of ID2000 and a set of ID1000, I think initially I'll use 4x1000 & 4x2000's, as long as these cope with the quantity of ethanol , there's always the option of adding a 9th injector pre throttle body or pre turbo.
Sent from my iPhone using Tapatalk
Last edited by heds; 15-09-16 at 08:30 PM.
Glad to see that cage gone, that was horrific!