rear disk brake pressure

[16v]

Hi guys just wanting to know what way to reduce the pressure goin to the rear brakes I know I can put in a couple of bias valves but also heard about people using mk3 astra rear hoses as they have a reducer built in. Any help would be great thanks

[Benn]

I use the ones fitted to a Gsi m/c. But i run a single brake line to the rear to give a better pedal.

Only ever locked one wheel up then i broke hard for a corner cause i wasn't watching what i was doing.

[craig green]

Another trick is to cut down the rear brake pads to reduce the pad contact area.
Proper way obviously is to reduce the bias/pressure in the rear hydraulic fluid.

[16v]

Iv got a gte master cylinder on mine so should be Ok then? I take it the ports with the extended bits are the restricted ones?

[Benn]

Yes, the screw it bits are the valves. If not look at aftermarket vales (Wilwood and such make them)

Ah, having looked for you, you can by these..

http://www.ebay.co.uk/itm/2Lbs-Wilwo...item51c2d22273

I'm unsure on what pressures you'd need tho.

I was talking of these at first..

http://www.ebay.co.uk/itm/Brake-Prop...item258fe69eb3

[craig green]

Iv got a gte master cylinder on mine so should be Ok then? I take it the ports with the extended bits are the restricted ones?

All Novas had rear drums, so no a std MC wont be right for 16v Astra GTE discs.

[rich a]

So if u have a Astra gte rear set up what mc should you be using Craig ?

[Benn]

You can only use a Nova MC. That's all that fits. Well a Early Cav ones fits. But you'll need all new brakes lines.


I use a std Nova gsi MC, i only run one line to the rear tho. But it works fit.

[craig green]

So if u have a Astra gte rear set up what mc should you be using Craig ?

There isnt one, you just fit discs & drive accordingly. Best to keep the drums then ;-)