Alloys on Novas: What have you fitted past or present

[Southie]

The idea of this thread is to get as many different pictures of alloys that you've had or currently have on Novas, basically a database to show what has been on offer.

Get pictures up and the size and offset of the alloys will also be a massive help for others.

For the insane fitments out there then describe what you've done to make your alloys fit.

Discuss and pictures are definitely a must please

[Davidn]

15 inch fan blades/ stepdowns, use to have 14 inch bbs's on mine

[sport]

Speedlines

[Southie]

Speedlines

Well get a picture up and get those out of the way then

We don't need double posts btw, we need sizes of alloys that people are using.

[Lee H]

Went a bit more unusual on my old one . Slight arch mods on one side to get it low enough.

[millworm]

On my saloon when I bought it where wolfrace slot mags aniversary edition. 15",7j,et35,195/45/15




Then changed to rota kyusha 15",7J,et40,195/45/15 I have to run 3mm spacers on the front to clear 256mm brakes.




On my hatch I ran Revolution rfx 13", 6J, et35-40 wasn't marked in the wheel but was close to this. 165/55/13 tyres. Had to roll rear aches to stop them rubbing lowered about 60mm

[Southie]

Thanks millworm they're the sort of posts that will help out.

[sport]

Speedlines

Well get a picture up and get those out of the way then

We don't need double posts btw, we need sizes of alloys that people are using.

Slightly different spin on the old Speedlines

Im sure they were 15x6.5" with a 45mm offset. Tyres had a 45mm profile and car was lowered 35mm.

I honestly cant remember about arch work as it wasn't yesterday

[Benn]

A very old pic when mine had the dreaded Speedline Alliseos (sp?)



Cav polished turbo rims.



On painted Cav turbo wheels.




On BBS alloys...



Bit tight. Had to use a 3mm spaacer to get a fag paper between the spoke and caliper.

[Novasport]

6x14" Revolution RFX's

6x13" RFX's