Crown wheel and pinion

[mk1rallycar]

Hi all

I'm looking for a cwp for a nova rally car. Would prefer a 4.8, 4.5 or 4.3 final drive ratio if anyone has one.

I've got a 4.18 crown wheel but no pinion gear so would also consider just a pinion gear to suit as long as it's got 17 teeth and is 27mm deep.

Thanks

[novarally]

Presumably for an F10 or F13 'box?

[mk1rallycar]

Hi

Yes sorry, it's got a f10 quaife sccr gear set with a pinion gear that can be removed by removing the circlip.

Thanks

[RallyMarshal]

I might have a 4.18 CWP in my old spares box. Will have some surface rust as been stored a while...

I also have an F10 SCCR gearset with a broken 2nd gear if interested for spares? Will check what pinion that has - suspect its a 4.5 but dont have the crownwheel to match.

Paul..

[mk1rallycar]

Thanks for your reply Paul. I may be interested in a pinion gear for a 4.18 if you've got one of the size above. A 4.5 final drive would be great but looking for a crown wheel and pinion really if I'm changing the ratio.

Cheers

[novarally]

I should have a variety of different ratios available in a week or two, along with all sorts of F10/F13 bits and pieces (Quaife and standard).

[mk1rallycar]

Ok thanks Colin, keep me posted with what you've got coming in.

[mk1rallycar]

Hi all, still looking if anyone has one available.

[novarally]

I've got 3 or 4 which came to me with the circuit car I bought, but haven't had chance to sort through yet to see what there is.

Should have done it in a week or two.

Colin

[Peredur]

Colin,

Once you've sorted them, could you let me know what you have also?

Thanks