Nicks x18xe1 build (PBpatched)

[jimbob-mcgrew]

is it the AA, 6 pulse ?

i hope it works. when you planning on a test start ?

where did you find out by the way, i couldnt get any info

[totalnova]

Found a few bit and pieces on some forums like this

http://www.migweb.co.uk/forums/engin.../topics/199314

[totalnova]

is it the AA, 6 pulse ?

i hope it works. when you planning on a test start ?

where did you find out by the way, i couldnt get any info

I'm a while away from a test start, I'm still preping the bay at the moment and I need to find a new f15cr gearbox.

[jimbob-mcgrew]

check this out mate. all the info you need :

http://www.corsasport.co.uk/board/vi...=458623&page=1

[totalnova]

Cheers mate, I really need to crack on with this, but work keeps getting in the way

[jimbob-mcgrew]

dont worry, im not trying to rush you

i know what you mean tho, were all too busy to dedicate the many hours necessary. especially at the moment, with the short days/lack of light, and the ice and snow on its way.

ive got a few things i wanna do to my car too, but unless its an emergency, im not gonna bother till spring time

[novarally]

I'm a while away from a test start, I'm still preping the bay at the moment and I need to find a new f15cr gearbox.

I've got an F15 here, out of a Corsa B SRi. Drop me an e-mail if any use to you.

[totalnova]

Only a small update, I started out the day with the intention of removing the underseal from the front wheel arches, about ten minutes in i found some tin worm hidden under the underseal, access wasn't to bad as it was also in the battery tray, lucky I caught it early.

[IMG][/IMG]

View from above

[IMG][/IMG]

Ignore the dodgy garage trainers

And all repaired

[IMG][/IMG]

The welding isn't perfect but its strong and will do, nothing the grinder wont sort.

I've done loads more that ill update later including two rust free doors i picked up

[totalnova]

Feeling really disheartened at the moment, found some rust and it might just be to far gone, I'll uploads some pictures in a few minutes.

[totalnova]

well i knew there was some rust in the scuttle area as i had seen this

[IMG][/IMG]

i then went inside and peeled back the carpet and found this

[IMG][/IMG]

Now im new to this whole restoration stuff and im learning as I go, so in peoples opinion is this repairable? its in such a hard location to get to, even thinking i might have to remove some of the scuttle to get to it.

what do people think?