Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: e16se will not rev above 4k

  1. #1
    User
    Join Date
    Nov 2012
    Location
    teeside
    Posts
    185
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default e16se will not rev above 4k

    im after a bit of advice my gte e16se engine will not rev above 4,000 revs when under load but will rev to limiter when just sat running, have checked valve timing numerous times, changed plugs and leads injecter seals as were split, i purchased a dizzy which i told would fit this engine to try but the multiplug is different and cant seem to find one the same.

    any ideas greatly appreciated as hoping to take it to pvs.

  2. #2
    Senior User mowgli's Avatar
    Join Date
    Apr 2002
    Location
    somewhere in the 80's, hinckley
    Posts
    35,194
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    your dizzy timing sounds out... remember, if you follow Haynes to set it, remember to retard it a few degrees to allow for unleaded fuel... as the book only works for leaded

  3. #3
    User
    Join Date
    Nov 2012
    Location
    teeside
    Posts
    185
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    when i first got the car i marked the dizzy's position, it is set to that position if i turn it either way it runs worse.

  4. #4
    Senior User mowgli's Avatar
    Join Date
    Apr 2002
    Location
    somewhere in the 80's, hinckley
    Posts
    35,194
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    ok, maybe your coil or coil amplifier are shot. have you checked for air leaks, icv faults etc?

  5. #5
    Senior User
    Join Date
    Sep 2008
    Location
    West Yorkshire lad
    Posts
    22,243
    Post Thanks / Like
    Mentioned
    6 Post(s)
    Tagged
    1 Thread(s)

    Default

    Also have you done a compression test on all cylinders wet and dry?

  6. #6
    Senior User mowgli's Avatar
    Join Date
    Apr 2002
    Location
    somewhere in the 80's, hinckley
    Posts
    35,194
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    it could be fuel related.. is the pump ok? have you changed the filter?

  7. #7
    Senior User
    Join Date
    Feb 2007
    Posts
    16,486
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    i have a similar problem where i cant hit the limiter.revs to 6000 then misfires.

  8. #8
    User
    Join Date
    Nov 2012
    Location
    teeside
    Posts
    185
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Yea changed filter fuel pump rate seems ok, have bought a compression tester so waiting for that to arrive, doesn't seem to be an air leaks and runs spot on on idle I will check coil today

  9. #9
    Senior User
    Join Date
    Feb 2007
    Posts
    16,486
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    the pumps cause alot of problems but can appear ok

  10. #10
    NW BOYS Club Member Riggy's Avatar
    Join Date
    Jul 2003
    Location
    United Kingdom
    Posts
    11,735
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Have you checked the timing with a timing light or just of the crank marks ?

    I'd prob go with a fuel pump issue though , not supplying enough under load , can you try another pump ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •