Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38

Thread: c20let high idle problem

  1. #1
    Senior User
    Join Date
    Aug 2008
    Location
    blackpool
    Posts
    3,415
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default c20let high idle problem

    My c20let starts idiling from cold at 1200 rpm and then starts climbing to.near 2000rpm and wont go down I've checked everything. I've noticed its smoking straight away from cold and the wideband is all over the place.The only thing I can think it is is the cts sensor any help would be great its really peeing me off now.

  2. #2
    User
    Join Date
    Jun 2007
    Location
    cumbria
    Posts
    953
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Air leak by sounds of it after throttle body

  3. #3
    Senior User
    Join Date
    Aug 2008
    Location
    blackpool
    Posts
    3,415
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I've checked for air leaks had all the vac pipes off and boost pipes New gaskets on its got me stumped! I've sprayed around the pipes no change in revs just constantly idling at 2000 rpm.

  4. #4
    Senior User
    Join Date
    Aug 2008
    Location
    blackpool
    Posts
    3,415
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Any one shed some light !!!

  5. #5
    Senior User
    Join Date
    Aug 2008
    Location
    blackpool
    Posts
    3,415
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Bttt

  6. #6
    Senior User
    Join Date
    Aug 2006
    Location
    I live inside your pants
    Posts
    4,527
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    electrically disconnect the ICV. If the revs drop it could be an indication its been asked to open (perhaps by CTS failure) if you clamp the hose or block it off and the revs are still high then that would suggest an air leak. The lambda being all over the shop would point towards unmetered air, ie- a leak downstream of the AFM

  7. #7
    Senior User
    Join Date
    Aug 2008
    Location
    blackpool
    Posts
    3,415
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Ive tried that mate no different being unplugged i did squeeze the icv hose and the revs droppe. Ive now removed the loom and going to go through it for snapped wires so fingers crossed thanks.

  8. #8
    Senior User
    Join Date
    Aug 2008
    Location
    blackpool
    Posts
    3,415
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Right ive found a few dodgy wires repaired them put loom back in still doing it. I've got another icv to try so will give that a go tonight its really doing my head in now anything else I could check??

  9. #9
    User
    Join Date
    Oct 2007
    Location
    Charlesworth Glossop
    Posts
    260
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Let me no how you get on mate I have the same problem

  10. #10
    Senior User
    Join Date
    Aug 2008
    Location
    blackpool
    Posts
    3,415
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Will do mate how long has yours bein playing up??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •