can anyone point me in the direction of a guide on the fitting of a corsa servo and master cylinder into a nova. i have searched but can only find references to it been done.
cheers people
corsa servo and master cylinder guide
can anyone point me in the direction of a guide on the fitting of a corsa servo and master cylinder into a nova. i have searched but can only find references to it been done.
cheers people
my project threadOriginally Posted by mowgli
Not sure there is one, but Iain did a good guide like job on his in his track car build thread.
Apache Orange OPC Corsa A | 1986 Jamaica Yellow 1.2L||GSi SALE PARTS / SRi PARTS / XE PARTS|Buyer/seller,feedback:
you have to cut there under the battery and put it down through there and I think that you have to weld in a plate to bolt on the servo and pedal I will try to find out more tonight
cheers both i will have a look. greene94 if you could please
my project thread
you need to cut out the battery tray an weld in flat sheet
when you take the servo off the corsa get the black metal plate too you can then cut the flat sheet an weld in the platemakes it easy to position the servo
hardetst part is mounting the pedals
there used to be a lot of pics on loggyboy s build thread but this was a few year ago
Excuse bringing up an old thread, but my pics are still live if anyone is interested
http://www.loggyboy.com/images/MeritMk2/CorsaBrake/
Posting Permissions
Reply With Quote