I ran Renault 19 16v alloys on my first Nova. CB on those was bigger than the Nova. The bolts centralised the wheel. If you have a wobble its because they are buckled or the tracing is out, or they need weighting properly.
I ran Renault 19 16v alloys on my first Nova. CB on those was bigger than the Nova. The bolts centralised the wheel. If you have a wobble its because they are buckled or the tracing is out, or they need weighting properly.
My Rebuild
They're over there with their new toys. Someone brought them in. No idea who bought them though.....
Iirc the plastic spiggot rings are only to keep the wheel centralised making it easier to put the wheel bolts in.
Theres way more than a 1mm gap in there. I reckon you can fit spigot rings in and I 'd advise it...borrow some digital calipers and measure the bore and hub
the bolt seats seem fine, and it has a spiggot ring on one of the wheels, and they are needed because i thought the same as you john as the bolts are tapered. but apparently not so!
just looked at the one spiggot ring thats on it and it has a 56.6 on it so this must be the size! thanks for your help!
It has been tracked up by myself and balanced the wheels and also checked the wheels to see if they are buckled. Looked for play in the joints and no luck they are all tight. My friend had the same problem on his caddy and new spigot rings fixed it
If the wheels sitting off center, it will run like a cam lobe (if you get me as it will be over center when spinning) Check you've not lost wheel weight.
Believe me, i've looked in to this alot, as my cb if a bit of have to use wobble wheel bolts...
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce