Usually get post mount and radial mount Benn.
Usually get post mount and radial mount Benn.
I called them post mount, but sure on the AP website they called them something else... Either way..
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
Firstly a big thank you to Jezz (toymex) for lending me his set of compbrake calipers so I can try them for size. My plan is to keep my 280mm discs and as Jezz is running 265 discs I had to have a play with some washers etc to space the caliper out.
The results are positive and the calipers fit under the wheels without any spacers.
This shows the difference in size between the two calipers
So with the calipers position sorted I've worked out some dimensions and have ordered some aluminium bar to machine some new brackets.
I've had to send some photos and dimensions of Jezz's calipers to compbrake as on the website they show the radial mount holes being 120mm apart but the ones I have borrowed off Jezz are 130mm apart
Last edited by TWAG; 13-03-15 at 05:47 AM.
View my car here.
http://www.novaload.net/features/vie...re.php?ref=537
Nice work on the calipers. Should be much nicer..
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
Cheers Benn.
calipers are being delivered on Monday along with the aluminium bar so hopefully things will speed up next week.
I measured the wheel spacers I have been using and they are 8mm, so should give me enough room for my Toyo R888's.
Wat were your old calipers?
View my car here.
http://www.novaload.net/features/vie...re.php?ref=537
View my car here.
http://www.novaload.net/features/vie...re.php?ref=537
View my car here.
http://www.novaload.net/features/vie...re.php?ref=537