Input shaft and spigot bearing

[trojanhawrs]

The input shaft on my new 5 speed box only has the splines - like this
http://www.google.co.uk/imgres?num=1...ed=1t:429,i:90

My 4 speed had a smaller diameter smooth shaft after the splines (for spigot bearing?). Will this be an issue?

[garyc]

No I've got a bunch of cranks on the shelf and half of then don't have spigot bearing in them.

[trojanhawrs]

Thanks mate

[Dave A]

Sorry to drag this one back up. Just fitting a new engine and the crank has a spigot bearing in it, the gearbox input shaft does not have the smooth shaft end, just stops after the splines. Will this cause an issue or should I remove the spigot? Probably a pain to get out, but rather do it now if have to then when its back in the car.

[jimbob-mcgrew]

one of these badboys you mean ?

isn't it needed to keep the input shaft central ?

[jimbob-mcgrew]

[meritlover]

... Probably a pain to get out, .

no, it's not.

[Dave A]

Yep thats the one. The old engine never had one, the new one does, but the input shaft on my box does not have the extension after the splines, thats the concern, so think I'll remove the spigot now to save potential issues later.