Hi guy need help!
got mk1 nova fitted opel manta alloys but when lowered they scrape in arches like hell!
i have grinded them back but still not much joy.
any advise or wheels that dont stick out as wide?
cheers steve
Hi guy need help!
got mk1 nova fitted opel manta alloys but when lowered they scrape in arches like hell!
i have grinded them back but still not much joy.
any advise or wheels that dont stick out as wide?
cheers steve
wrong wheels for a nova iirc
the offset is all wrong
what off set do i need
i think the offset u need is et49 but i got a spare on mine at the mo an thats et39
Reported!!!
???????
The spam post are reported, not you.
success is only limited by a weak mind
The Ascona-Manta wheels have offset 30 to 37 ( the alu ones are usually 5.1/2 - 6")
The Nova ones are 47.5 to 49
So........ its is time either for harder springs or...less load.....or repair shop widening the rear arches
NOT TO FORGET that by changing the offset you have steering geometry problems and bearings/shafts problems in latertime
Since as they say ....a picture is a 1000 words.....:
Last edited by DRAGRACER; 30-05-12 at 05:08 AM.
grind em, bend em, pull em... you only need to 'invent' 15mm