Furthermore i had to add a small extra arm to convert the side movement of the shifter to a longitudinal movement
Here's a video to show how it works.
Another thing i've added was a new seperation between the passengers compartment and the new so called engine bay
For that i've built a simple frame
and bolted some aluminium sheet to it
In the future this will be accompanied by a piece of acrylic glass to allow visibility to the rear
Thanks to the frame for the seperation i was also able to make the accelerator pedal work
The cable runs along the frame
trough the aluminium sheeting
to the front where its connected to the original cable which, obviously, is connected to the loud pedal
Even more cooling related stuff had to done in the form of tubing therefore it was necessary to fabricate two holder
they are now welded to the chassis and hold the tubes in place which run along where the exhaust used to be