Trechii Ltd
having a look on the great bay of Eeee and ive found a shop that sells a fair ol bit of XE stuff, but im mainly looking at the bearings, and bolts.
has anyone else used them for part?
also seen Glyco big end bearings...and experience in these? will be put in a lightly fiddled engine
i think this is allowed...no links etc...correct me if im in the wrong.
i had a full set of valves oil pump and a few other bits and pieces a few years ago (first let i had in the nova) and most bits was fine but the oil pump ate its self in about 50 miles locked solid and spun on the crank which nackered the crank!
non moving parts ect were great and the valves were fitted in the let head which is fitted on my cav which is still going strong now
I've heard of a few people using glyco without any problems
i used them in the past but was for non moving parts and all parts are still going strong now.
Just dont buy his hydro lifters, there crap aftermarked stuff.
ive got re conned hydro lifters that i did myself. it was mostly going to be piston rings and bearings and the odd seal that i need
Tom Reid did a rebuild on a x16xe for me and used parts from Trechii, no problems 3,000 miles on. Think hes cheap because its just one bloke with a stock room and computer. I collected the parts as its not that far from me.
The current Glyco bearings are not the same as they once were, they are now just re-boxed low qualiy bearings.Originally Posted by swedge
Steve
Posting Permissions
Reply With Quote