yeah i had seen them before and thats where the idea came from
yeah i had seen them before and thats where the idea came from
Your cars come on leaps and bounds since i last had a look, like it with the sport decals and gte bumpers. Good work
cheers fella
well i tried and it only lasted 1 day without modifying the bus
looks much better though
needs smoked sri headlights next
Shoosht
looks like the car may be up for sale if i cant find anywhere local to keep it, ill probably ebay it to test the water
1990 on a G originally a 1.0
fitted with a 2.0 8v 20seh from a mk2 cav 130bhp
port and polished head
274 cam from auto sprint
headgasket changed less than 500 miles ago along with all other gaskets/headbolts etc
new GM steel water pump
R1 bike carbs jetted for a 2.0
Bogg Bros Inlet manifold
mk2 choke cable
new rocker arms
lifters all drained and cleaned so no tapping
F16 close ratio gearbox
rosejointed gearlinkage
obviously using 2.0 mounts and 22 spline shafts
strenghtening kit welded in with strut tops
new upper front panel
2 new sills
rear arches have been replaced before i owned it
rally desing polly bushes fitted on the front end
Fk G4 Coilovers fitted on the front
spax shocks on the rear with 60mm springs
smooth GTE front and rear bumpers
both doors have been replaced which are pretty much mint 1 has been delocked
corsa sport front and rear seats, the rears dont fit perfect but bolt in fine
Nova GSi dash with astra GTE digi dash all working
richbrook gearknob and handbrake
astra bonnet vent
omp strut brace
also has a AFR gauge fitted and boss welded into the exhaust, all working fine
fitted with cavalier turbo 288 brakes up front
15" cesaros sprayed white with black spokes 195/45/15 tyres 2x goodyears 2 budgets
car was resprayed about 8 months ago in glacier white and also had nova sport decals fitted which were cut from originals so perfect fit
carbon vinyl sidesjirt decals
the car has no distrbutor, its running a megajolt mappable ecu which is currently running the base map which is fine but would obviously give more power when mapped
comes with ecu, custom made loom with all plugs etc
data cables and crank pulley
i was intending to build a track car and fit a 2.0 16v so the car can also come with
stripped down early 20xe
early 86p forged pistons
standard rods
early crankshaft which has been polished
heavy duty diesel duraglide main and big end bearings
i have 2 GM cylinder heads which are stripped and one has been half ported and polished just needs finishing off
i have the pipe to sleeve them too so they wont go porous
starters/alternators etc
no exhaust for it though
also have a saftey devices bolt in roll cage as well with door bars etc, will need a paint though
the cars mot runs out the end of this month but will mot it, tax will run out too but its not insured anymore but i can get it taxed at buyers expence
now for the bad parts as every car has it ad id rather not bull**** you and waste your time
the car has had its fair share of welding with most of it being on the floorpan, its had a few patches on the floor an in front of the front seats and a couple patches in the boot where the drain grommets were
wiring could be tidied up behind the dash
heated rear window dosnt work could be the relay i think
heater cables are broke so only works on hot but when do you ever put it on cold?
needs part of the lock mechanism on the drivers door
tracking will need done
small dent beside the drivers door handle where a wheely bin fell over :/
as i was intending to strip the car i have sold the electric windows and central locking kit along with the door cards so you will need something to replace these with
all it needs for its mot is a small section welded on the rear chassis leg but like i said i will mot it
****e mate is there no where in hawick you could keep it?
Going to see a guy on Friday who's literally 30 seconds walk so hopefully get that place room to keep 5 cars in as well
well finally got myself a lockup to keep the car and only 1 minute walk away
sold the 8v engine guys coming to get it on saturday so i can get the car stripped and onto a rollover jig when i get one
sorted a couple problems on the vectra, reistor had gone on the heater fan so only worked on 4
89p later from maplins and a bit soldering and its fixed, found a leak on one of the hoses though when under pressure one of the clips from the intercooler pipes has been rubbing against the radiator hose and caused a split
got a new GM hose from ebay for £9 so not too bad