At the minute all i can think of is to wet and dry all 4 of my alloys to get the paint/laquer off etc but obviously i will be there till gone christmas. Is there an eaiser way to do this? like some sort of acid or something?
At the minute all i can think of is to wet and dry all 4 of my alloys to get the paint/laquer off etc but obviously i will be there till gone christmas. Is there an eaiser way to do this? like some sort of acid or something?
Nitromorse?
Yeah i know about this stuff but im having to do all of the alloy because there is alot of oxidation - even on the inside lip where the tyre fits.Originally Posted by Stanley
yup paint stripper is your best bet
nitromorse.go to a proper decorators merchant.not b and q.comes in much bigger tins and is much cheaper!
sand blaster is the easiest way.
or wire wheel on a grinder but be careful with it.
80grit sand paper, then 180 after wards.
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
what he saidOriginally Posted by Benn
Doing it on a Da and the front face will be bare in 10mins..
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
Whats a Da ?Originally Posted by Benn