well thats not right
do as the image shows, the holes for the hoses are there for a reason! have you had a volt/resistance tester on the
fan?
I took the t-piece of an old cav, it actually fits between the heater matrix and cylinder head pipe
well thats not right
do as the image shows, the holes for the hoses are there for a reason! have you had a volt/resistance tester on the
fan?
I took the t-piece of an old cav, it actually fits between the heater matrix and cylinder head pipe
I took the t-piece of an old cav, it actually fits between the heater matrix and cylinder head pipe[/quote]
I need to do some plumbing and shopping then
So the pipe was between the heater matrix and cylinder head pipe on the cav?
yes, but most people just plumb it into the thin pipes, because its easier than finding a 3cmish to 1cmish t-piece, i just came across it by chance
can't remember exactly how i put it, but if your bothered finding one, pm me and i'll check for you
I'd just T it in to the rad run off, much easier.
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce