My mate has told me that if i get a 1.4SR block, 1.3 head & crank and 1.2 pistons and rods from a certain year its possible to make a 1450cc uber high compression engine.
anyone else heard of this? i think those are the right parts
My mate has told me that if i get a 1.4SR block, 1.3 head & crank and 1.2 pistons and rods from a certain year its possible to make a 1450cc uber high compression engine.
anyone else heard of this? i think those are the right parts
a mate mine built a 14 bottom end and 1.3 top end carbd with a twin choke and it went like the clappers of hell, he had probs with the starter and the flywheel but
i wouldn't say you could put 1.2 pistons in a 1.4 block, and to get 1450 i would of thought it would have to be machine work, but i do know the 1.3 head can be put on the 1.4 block to raise compression. Also if it was 1450 i would have thought pistons would have to be bespoke.
Last edited by General Lee; 16-04-09 at 03:14 PM.
it might be the 1.2 head with 1.3 pistons rods n crank. ill see if he can find the guide on it as he said he has it lying around somewhere
Complete 1.2 engine with the 1.3 rods and crank, then a suitable carb.
Its 1.2 + 1.3 parts that = 1.4 Thers already a thread on here that goes into detail about what needs done.
oooh, linky please...
asa pm mowgli iirc hes done it. makes a very torquey and revvy motor.
http://www.pngclub.com/forum/showthread.php?t=111826Originally Posted by Asa-James
This might help.
very interested, i'm buying a 1.2 and i still have my old 1.3 in the garage...