Results 1 to 7 of 7

Thread: Head unit problems

  1. #1
    User
    Join Date
    Dec 2006
    Location
    Carlisle, cumbria
    Posts
    1,482
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Head unit problems

    My nova still has standard untoutched wiring for the head unit. It did have a phillips sterio which did not work, the face would illuminate when you turned the headlights on (round buttons etc) but it didnt work.
    I figured it was knackered so i got a kenwood CD and plugged that in. All that happens is you can hear the cd reader fire up and nothing else.
    I also tried it with a harness adapter but using that nothing would happen with either head units fitted.

    Help please

  2. #2
    Senior User craig green's Avatar
    Join Date
    Jan 2003
    Location
    SOMERSET
    Posts
    19,510
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Go over the instructions/wiring diagram with the HU. Check it against the wiring behind the dash. It probable wants another live putting on one of the pins.

    Even late Novas with ISO blocks need one of the pins moving in the plug as they don't line up correctly.

    It only needs a 12v live & earth anyway.

  3. #3
    Senior User Spudly's Avatar
    Join Date
    Mar 2005
    Location
    Hull, East Yorkshire. Drives: Vectra V6 'rusty bus'
    Posts
    26,069
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Have you swapped over the yellow and red wires on the aftermarket wiring for the stereo as they are the switched and live feeds for the unit and on vauxhalls are the opposit way round, most manufacturers put bullet connectors on as standard so you can swap them or join the two if you wish to have a permanent live setup, try this and see how you get on!

  4. #4
    User
    Join Date
    Dec 2006
    Location
    Carlisle, cumbria
    Posts
    1,482
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    can anyone tell me what colour the following sterio wires are on the nova loom:
    earth
    switched live
    constant live
    sterio illumination

  5. #5
    Newbie
    Join Date
    Nov 2008
    Posts
    12
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    On my mrk 2 sr the earth was brown.
    As for the switched live and live if i can remember right the live was red and switched live was black dont quote me on that it may be the opposite. Hope it helps

  6. #6
    Senior User AlexW's Avatar
    Join Date
    Jan 2008
    Location
    In Space, Lost.
    Posts
    11,566
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Didnt see this thread before.

    This link has all the usual ISO wires.

  7. #7
    User ant_tay's Avatar
    Join Date
    Jul 2008
    Location
    Bridgend, South Wales
    Posts
    1,199
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    red = constant live
    black = switched live
    brown = earth
    illumination is grey/green

    you can put the illuminayion wire on the stereo to the switched live if you have no grey/green memory goes to the constant live
    Last edited by ant_tay; 20-11-08 at 11:12 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •