launch controll

[Mike]

sorry for being ignarant, i will stop next time, i didn't realise it was a meet there was only a few car's there.:D its at the old winkin frog pub. 2 novas

Aye, at the w@nking toad

[C14se]

Aye, at the w@nking toad

nice name for a pub

[Stuart]

bin the text typing nova nick..

[Dinoman]

you need to have it set up on a laser alignment rig

isnt too easy to do yourself tbh

Hi it is simple to do it your self all you need is a level floor to sit your wheels on, can use bits of wood to get floor level, then with a spirit level standing vertically on the floor and at wheel center measure with a tape measure difference between the top of the wheel and bottom of wheel ( not Tyre) to spirit level, so if you are running normal Neg Camber at present approx 3mm or 1/8th inch so increase it to about 5 to 6mm or 1/4 inch, most important is to have both sides the same, I hope that helps, Regards DM

[Paul]

This post is over a year old...

[Dinoman]

This post is over a year old...

No problem, people can still read it OK, Regards DM