fitting twin 40's need help with ignition

[adam-d]

i can tag the rev counter direct off the coil i think.
i have a black, black/red and brown
i guess these 3 are the live's and earths. im not sure either the black is live, or swiched same with black red.

i found a thin black with yellow trace too. on the cav it went to the carb some random couple of what loom like vacumm unit things. but i stripped the loom down and it joins onto the reverse plug loom. so ive no idea what its for.

[tookie]

the black with red stripe is for the starter motor u wont need that you can use the one from the corsa loom,if u strip the loom back far enough all the reds are joint together once you've found where they join just chop out the thick ones that would of gone to the starter and alternator,the black with yellow stripe was for the auto choke on the cav so you don't need that,the random wires that run into the reverse plug are for the radiator fan nd the switch for it you can chop them out aswell and use the corsa ones,hope this has helped.

[adam-d]

ok on the multiplug i have found 1 black and one brown,.
the only red i can find running upto the ecu, cuts into the battery main live, in the middle of the loom by the main live for the starter. now as im cutting this out, i can just extend that to a power source and thats it im done?

[tookie]

yeah just extend it to the permanent live that you want to use.