wiring for c16xe and x16xel engine into nova

[Cheeze]

just a quick question

Im going to be putting a c16xe and a x16xel engine into two nova soon, just needing some info on the wiring for these engines.

For the c16xe and the x16xel i have two plugs, a 3 wire one which i think is for the air con? wire colours are on both engine looms
Black/green
Black/white
Black/blue

Now on the c16 loom i have a larger plug with 9 wires into it which are

Red- battery live
Black- ignition live
Large black- unknown
Brown/yellow
Brown/white
Blue/red
Red/blue fuel pump?
Green- rev counter
Blue/brown

And now the x16xel

brown/white
brown/yellow
red/blue - fuel pump
blue/red
green- rev counter
blue
brown/blue
black/brown

Anyone help?

[burgo]

any help? if so thank adam

[Adam]

The 3wire one(black/green etc etc) isn't needed in a nova.

[Cheeze]

The one that not needed Burgo, is that the brown/white i guess?

And the brown/yellow is constantly earthed yes?

What the colour of the ecu ligth wite there?

[burgo]

no the brown and yellow you only earth when you want to flash the fault codes

[Cheeze]

Ah got you now, thanks

[Adam]

ecu light=brown/blue

[Cheeze]

ok so what i make of this now is
C16XE
Red- battery live
Black- ignition live
Large black- unknown is this a ign live??
Brown/yellow Earth to flash fault codes
Brown/white- not needed
Blue/red not sure on this one
Red/blue fuel pump?
Green- rev counter
Blue/brown- ecu light

And the X16XEL

brown/white not needed
brown/yellow- earth to flash fault codes
red/blue - fuel pump
blue/red unkown also
green- rev counter
blue- cooland temp
brown/blue ecu ight
black/brown Any ideas on this also

[burgo]

the blue/red is for the vss

[Cheeze]

which is what , sorry guys first time doing this conversion have a pop at vehicle speed sensor?

Does the c1x need this plugged in? dont think we used it when i done the conversion into a corsa 1.2