Wow
Type: Posts; User: _Tomiboy; Keyword(s):
Wow
Lambo :)
c16nz
Hi, I sent you message.
Hi I have F10 quaife. PM me If you are interested.
I had problem with the cable turret, there is the breather about 50mm deeper, so need a longer hose to avoid.
https://photos.app.goo.gl/mPs2Giymy9yHnWTLAThe green line is with 120kg passanger. The red and blue is without passanger and the car was 30kg lighter, so 150kg lighter overall. ...
Mostly I look on the lateralAcc, graph, and click on the maximum button. From that I see if the setup is better I have bigger corner G-s, or if the tyre is overheated see the lower G-s.
All the cams are between 104-114 deg on the sheet. Where will be the best for your engine, and for your setup you should find out on the dyno or with G sensor.
I like my tranX plated. The car likes the full throttle turns, without that is understeering, but with is a little oversteering.
I wondering every time how lighter is than my corsa B.
Hi,
This should be a straight fit. I would not use the engine harness and the ecu, look for some c14se or c16se loom and ecu, it will be easier to adapt. You must not be a mechanic, just think...
7200 works
And is it fine? :)
With competition high lift cams at the 8v heads you must always use special cam spring washers and machine out under the washer otherwise you can not reach the 34mm fitted spring...
The base diameter is smaller, otherwise it is not possible to make higher lift than 11,67mm on this engines. The other reason with small cams, that it was regrinder from oem cam.
What cam do you...
I have the same alternator, works fine, enough for the davies craig waterpump too. Like your Plastik tightner.
Do you know the WHP?
http://hh-ms.com/70-lsd-with-large-side-gears-f20.html
I bought 2 years ago titan grade 5 for the hubs, and have no time to make it. :)
Missed at that time to take photo from the issue.
https://photos.app.goo.gl/vqnxc93gwr3sfXzt6
Here this was the unmachined, and after that made the modification.
This is the picture from the...
With the astra hubs you still need to change a little on the hubs, otherwise it will be 4mm offset, and the brake will not fit.
No, that is from Dbilas.
Use the daihatsu cuore 60 Amp alternator, than is almost 2kg lighter, and fits on the vauxhall bracket, have enough space under the Carbs/ITB.
https://photos.app.goo.gl/vKjXNEB158zqd3E47...
Hi,
I had the same 2 weeks ago. The problem is the 4th gear, it fits not in the housing. You must grind out some where the hole is to the diff.
The combustion chamber looks different, and one hole for the idiotic egr.