competition parts, Quaife sccr, gear lever, suspension, z18xe engine, cams

Printable View

11-07-17, 08:45 AM
Mxcrazy

z18xe engine, high compression, 7.1/4 clutch/flywheel, Tony Law system, Quaife.

Updated 19th November.

*****UPDATED AGAIN*****. OFFERS ACCEPTED! Update as of 6th October.

Quaife F15 SCCR 3.9:1 Final drive new £300

Quaife quick rack £100

Chassis Strengthening kit. £30

Engine stuff.....

Z18xe 'based' engine, high compression 12:1
Z18xe head, ported, 5 angle seats
Steel rods, new.
Z18xer pistons modified with deeper cut outs.
Block, sumps (1800/1600), cambelt, solid cambelt rollers, water pump, basically whole engine in parts, including bolts, shells, rings and Balanced crank. should be good for 220+ bhp (depending on cams). Would need valves, springs and cams adding £600

6 point safety devices cage, bolt in £250.
11-07-17, 08:51 AM
Mxcrazy

https://uploads.tapatalk-cdn.com/201...1cc60eca35.jpg https://uploads.tapatalk-cdn.com/201...7366941ea9.jpg https://uploads.tapatalk-cdn.com/201...06bd2b9d34.jpg https://uploads.tapatalk-cdn.com/201...1a60f9325f.jpg https://uploads.tapatalk-cdn.com/201...f2f212a377.jpg https://uploads.tapatalk-cdn.com/201...5ca402944e.jpg https://uploads.tapatalk-cdn.com/201...b327941d6f.jpg https://uploads.tapatalk-cdn.com/201...610e317dab.jpg https://uploads.tapatalk-cdn.com/201...58daa517f9.jpg https://uploads.tapatalk-cdn.com/201...caa6eda2f4.jpg https://uploads.tapatalk-cdn.com/201...66b3fb2153.jpg

Sent from my iPhone using Tapatalk
11-07-17, 08:53 AM
Mxcrazy

Red car is just to show wheels.

The pulley is billet alli with a 36-1 trigger wheel fitted, lighter than stock and under drive for higher revving engines to keep alternator speed down. £160.

Sent from my iPhone using Tapatalk
11-07-17, 10:18 AM
Iain

PM'd
11-07-17, 12:53 PM
baz_rsp

Do you know if the final drive will fit the quaife f20 kit??
11-07-17, 01:33 PM
Mxcrazy

Quote:

Originally Posted by baz_rsp

Do you know if the final drive will fit the quaife f20 kit??

It wont sir.
17-07-17, 02:53 PM
wwinstanley

are they the bilstein front coilovers supplied by Harry Hocklys?
17-07-17, 09:38 PM
Mxcrazy

Quote:

Originally Posted by wwinstanley

are they the bilstein front coilovers supplied by Harry Hocklys?

No, but they are big tube style and i believe the various 'Inserts' available can be exchanged in if needs be.
01-08-17, 02:25 PM
Mxcrazy

Shell and gear kit sold.

I still have a brand new Quaife 3.9:1 F15 synchro final drive for sale (shaft and crownwheel).

Offers accepted on any other parts.
01-08-17, 03:18 PM
total_vauxhall

You still got those top mounts?
06-10-17, 10:39 AM
Mxcrazy

All updated as to what i have left. Pictures out of date as some stuff sold, some stuff not pictured.

Serious offers accepted on anything. Just ask. Thanks.

I cant change the title. Sorry.
10-10-17, 12:15 AM
C16xe

Any pics of cage? Will it fit a mk1 dash with no cutting? Whats your location thanks
10-10-17, 09:10 AM
Mxcrazy

Quote:

Originally Posted by C16xe

Any pics of cage? Will it fit a mk1 dash with no cutting? Whats your location thanks

Not a clue if mk1 or 2 makes a difference, it is a dash dodger style and was fitted in a mk2 just fine. I dont have any pics at the moment as it is in storage at my friends unit. Its just the bog standard safety devices bolt together/in cage.

I am located in East Sussex. Cheers.
10-10-17, 12:43 PM
_Tomiboy

Still interested on the input shaft. :)
12-10-17, 12:19 PM
nova_niek

Bilstein kit still on sale?
14-10-17, 09:53 AM
nova_stee

Wheels still forsale?
14-10-17, 06:31 PM
Mxcrazy

Quote:

Originally Posted by _Tomiboy

Still interested on the input shaft. :)

PM me your delivery address and I'll get a quote to ship it to you Tomi.
14-10-17, 06:32 PM
Mxcrazy

Quote:

Originally Posted by nova_niek

Bilstein kit still on sale?

They're sold, sorry.
14-10-17, 06:32 PM
Mxcrazy

Quote:

Originally Posted by nova_stee

Wheels still forsale?

Yes sir, still available.
19-11-17, 09:46 PM
amthomson1976

Tony law exhaust still available? Any pics

Sent from my SM-G930F using Tapatalk
19-11-17, 11:37 PM
Mxcrazy

Quote:

Originally Posted by amthomson1976

Tony law exhaust still available? Any pics

Sent from my SM-G930F using Tapatalk

Sorry, sold.
17-01-18, 11:21 AM
amthomson1976

Would you sell the solid cambelt rollers seperate?

Sent from my SM-G930F using Tapatalk
11-05-18, 10:14 PM
corsamaxi

Is any of this kit left, interested in the bottom end of the engine most and the bottom pulley, but anything else?? Can you email me on bryan.whale@rainbowbath.co.uk or call on 07971 435221. Cheers Walt.
21-05-18, 12:23 AM
corsamaxi

Quote:

Originally Posted by corsamaxi

Is any of this kit left, interested in the bottom end of the engine most and the bottom pulley, but anything else?? Can you email me on bryan.whale@rainbowbath.co.uk or call on 07971 435221. Cheers Walt.

Nothing left then???