http://i255.photobucket.com/albums/h...ps13e5cff6.jpg
:)
Printable View
3 years ago! Might update this if i can get near a computer, lots gone on... Ish.
So. ill upload a few photos of what ive been up to..
https://scontent-lhr3-1.xx.fbcdn.net...d8&oe=571BBB0D
https://scontent-lhr3-1.xx.fbcdn.net...93&oe=5709BCB9
https://scontent-lhr3-1.xx.fbcdn.net...16&oe=57161A82
https://scontent-lhr3-1.xx.fbcdn.net...91&oe=571A6D2A
https://scontent-lhr3-1.xx.fbcdn.net...8f&oe=56FE52E1
Converted some Bilsteins to adjustable platform:
https://scontent-lhr3-1.xx.fbcdn.net...a1&oe=56FD98FD
https://scontent-lhr3-1.xx.fbcdn.net...e6&oe=570CB483
https://scontent-lhr3-1.xx.fbcdn.net...5c&oe=56FEE1AA
https://scontent-lhr3-1.xx.fbcdn.net...17&oe=571053ED
sat with 12" springs at the moment but it sits too tall for my liking. going to try some 10"s and cut down the bumpstops.
also acquired some of my favourite wheels:
https://scontent-lhr3-1.xx.fbcdn.net...20&oe=57129346
and then this happened after having a go in a GTi-R
https://scontent-lhr3-1.xx.fbcdn.net...53&oe=570C6CD7
Set about making up a manifold and that. so first up is flanges..
https://scontent-lhr3-1.xx.fbcdn.net...f0&oe=5707F42C
https://scontent-lhr3-1.xx.fbcdn.net...aa&oe=5716B5A2
https://scontent-lhr3-1.xx.fbcdn.net...21&oe=5746CC0B
https://scontent-lhr3-1.xx.fbcdn.net...6d&oe=570EE22A
https://scontent-lhr3-1.xx.fbcdn.net...87&oe=5716CF46
https://scontent-lhr3-1.xx.fbcdn.net...ea&oe=571D5881
https://scontent-lhr3-1.xx.fbcdn.net...59&oe=57178E3F
added in a cross brace between the struts that ties in with the cage while i was at it!
mounted the rad to clear the oil cooler in front
https://scontent-lhr3-1.xx.fbcdn.net...26&oe=571E882D
https://scontent-lhr3-1.xx.fbcdn.net...cb&oe=56FCC472
then i got carried away with the holesaws lol
https://scontent-lhr3-1.xx.fbcdn.net...d5&oe=570F79A1
https://scontent-lhr3-1.xx.fbcdn.net...be&oe=5700B9D9
Front panel notched to clear inlet boost pipe:
https://scontent-lhr3-1.xx.fbcdn.net...91&oe=57158398
mocked up a stainless water pipe with turbo feed:
https://scontent-lhr3-1.xx.fbcdn.net...70&oe=57144E27
minced around with washer bag tank and intercooler spray tank mountings:
https://scontent-lhr3-1.xx.fbcdn.net...98&oe=5715EBAF
then the dash:
https://scontent-lhr3-1.xx.fbcdn.net...f2&oe=5706127C
then started on the exhaust. 3" turbo back made from 304L stainless but ive decided im changing the down pipe and over axle section since these photos..
https://scontent-lhr3-1.xx.fbcdn.net...9b&oe=56FC46F9
https://scontent-lhr3-1.xx.fbcdn.net...a4&oe=56FE69A0
https://scontent-lhr3-1.xx.fbcdn.net...77&oe=570BBE5C
https://scontent-lhr3-1.xx.fbcdn.net...b3&oe=57197D40
https://scontent-lhr3-1.xx.fbcdn.net...ad&oe=570EF7F3
then i cut the boot floor out
https://scontent-lhr3-1.xx.fbcdn.net...13&oe=57149452
that pretty much brings us to the beginning of this summer, i got kicked out of my workshop so i havent done a great deal. i plan on starting in business towards the end of this year so im prioritising investing in tools and sourcing a workshop over this now.
bought a gun and painted my cage and had the inside painted:
https://scontent-lhr3-1.xx.fbcdn.net...97&oe=570247AE
https://scontent-lhr3-1.xx.fbcdn.net...29&oe=57476A80
made this up too the other week.
https://scontent-lhr3-1.xx.fbcdn.net...59&oe=57472447
lots ive missed out due to the fact im going to remake alot of the stuff ive done. should be getting a coat of arctic white on it in february and im working on a rear disc conversion using clio 172 stuff. ill update it when i remember too lol
Nice work mate. Some nice fabrication work there. + I'm building an 8v turbo myself.
Very nice build this