Printable View
As title, anyone had experience?, can't really find anything that I like without spending a fortune, can buy a set of 5 spoke mini 15" wheels for very little, most of which seem to be 15" X 6.5j and et45 so from what iv read should fit my loon. Haven't found anything about centre bore size yet so just wondered if anyone had experience fitting them ?
Wrong pcd mate
All the ones iv looked at are 4x100
New mini is, I assumed you where talking about the old shape
Centre bore is 64mm I think so can spigot ring them down.
I use Mini front brake discs and a stainless ring to centre them.
I've had metro turbo wheels on mine but, holes lined up ok with no cross threading but the centre bore was huge. It came on revolution 4 spokes aswell which I think the mini lads use, look dreadful though.
See my project thread. The ones I have are 4x100, 5.5x15, ET45 with a 56.1 centre bore. You just need to enlarge to 56.6
They're the ones iv been contemplating buying, I think they look really good and that's just the information I needed cheers,
They are 4x4" pcd pal which is ever so slightly out . however i ran mini wellers 8j on my drag car for 5 years without any problems . never came loose or snapped a stud . worked perfectly fine . just make sure u use spigot rings
Work out to 4 x 101 pcd