Few minor little things.
Went back up to track and road to check a few bits and bobs.
First up was noise reduction, I used this at Cadwell previously and wanted to check it didn't affect the AFR as sometimes air boxes can cause problems
https://uploads.tapatalk-cdn.com/201...e40d02d671.jpg
Pleased to report no change at all and although it's hard to check when inside it did reduce the decibel meter reading by a few decibels so we'll see what happens
Another little plus was that we actually made 250.6bhp but slightly less torque but I'll take 250bhp however I can get it!
https://uploads.tapatalk-cdn.com/201...78ea8fc3.plist
Jim and Steve said fuelling is very very safe and with a bit of leaning 255+ would be achievable!!
So, air feed for the air box, hose is too long as I've got a reverie airbox on order and don't want to cut it down yet, headlight needs painting, both temporary solutions to see if it makes a difference
https://uploads.tapatalk-cdn.com/201...7dac73d3cc.jpg
https://uploads.tapatalk-cdn.com/201...58dae5d049.jpg
Also, crash damage repair!!
https://uploads.tapatalk-cdn.com/201...b0b7a390be.jpg
https://uploads.tapatalk-cdn.com/201...ec21ba64de.jpg
Might see if I can get a brands day in next week see if any of it has made a difference.