Printable View
gettin oil in the inlet manifold on my redtop.
only way i can see its gettin there is from the breathers from the rocker cover.
heard of a modification you can do to these breathers but dont know what to do or how it works???:confused:
please help.
cheers:thumb:
Go on SBD instruction pages, and look at the breather mod.
That should sort it
the cheapest an easiest way is to cut out the plate underneath the rocker cover (not all of it mind but about 90% of it)
Check the banjo union on the back of the inlet also, its got a pin holes sized hole that if blocked causes oil to sit below the TB on the branch of the runners & causes bad idle too.