front speaker wiring

[bigdee]

just got some pioneer 13cm 100watt speakers from where i work for ?5.50 i want to fit then into front doors. gonna build some pods but am stuck on how to run the wire from the door to the car. i have no other wires from the door to the car as i don't have any leccy windows or central locking. can't see a way to do it?
any ideas

[Cheese]

Drill a hole in the door, in between the two hinges, another one at the same height in the car body, (remove the front parcel shelf and the pannel in the footwell that supports it and drill) put a grommet in each and feed some speaker cable through... Connect it up..

Job done :D

:D Twin 40's on the way :D

[Stuart]

you can get rubber tubing to put the wires through so that its all water proof

Im a Corporate tart :D

[NovaCruiser]

an alternative method is to unscrew the little switch that turns the interior light on and off when the door is open/closed, you can then run a wire through the hole that is underneath this switch, it dosn't do any harm to the interior switch however lots of unscrewing and screwing up and/or putting lots of cables underneath this can harm the screw fitting.